Yes... I think I can do it, I found the method to resolve this issue.. . I compile file sys_config.fex in direction BPI-BOOT\bananapi\bpi-m3\linux. I change some value:
[ths_para]
ths_used = 1
ths_trend = 0
ths_trip1_count = 6
ths_trip1_0 = 100
ths_trip1_1 = 110
ths_trip1_2 = 120
ths_trip1_3 = 130
ths_trip1_4 = 140
ths_trip1_5 = 150
ths_trip1_6 = 0
ths_trip1_7 = 0
ths_trip1_0_min = 0
ths_trip1_0_max = 1
ths_trip1_1_min = 1
ths_trip1_1_max = 2
ths_trip1_2_min = 2
ths_trip1_2_max = 3
ths_trip1_3_min = 3
ths_trip1_3_max = 5
ths_trip1_4_min = 5
ths_trip1_4_max = 7
ths_trip1_5_min = 7
ths_trip1_5_max = 7
ths_trip1_6_min = 0
ths_trip1_6_max = 0
ths_trip2_count = 1
ths_trip2_0 = 105
After I compile file sys_config.fex to scipt.bin and copy script.bin file into two direction:
BPI-BOOT\bananapi\bpi-m3\linux\script.bin
BPI-BOOT\script.bin
Inset SD card into Bpi-M3 and get result
it is my test with kali linux:
