BPI-M2+ source code on github

All newest source code have update on this github site.

https://github.com/BPI-SINOVOIP/BPI-M2P-bsp

github.png857x585 34.7 KB

BPI-M2P-bsp Getting Started

Choose a board doing: ./build.sh,

Choose a board doing

"This tool supports the following BPI board(s):"

************************************************"

1. BPI_M2P_720P"

2. BPI_M2P_1080P"

3. BPI_M2P_USB_720P"

4. BPI_M2P_USB_1080P"

*************************************************"

BPI-M2P SD Card Info

Step 1.To be on safe side erase the first part of your SD Card (also clears the partition table).

 sudo  dd if=/dev/zero of=${card} bs=1M count=1

Step 2.Go to folder "Download", put the file(s) to 100MB of the SD Card whit DD command.

sudo dd if=boot0_sdcard.fex     of=${card} bs=1k seek=8

sudo dd if=u-boot.fex           of=${card} bs=1k seek=16400

sudo dd if=sunxi_mbr.fex    of=${card} bs=1k seek=20480

sudo dd if=boot-resource.fex    of=${card} bs=1k seek=36864

sudo dd if=env.fex          of=${card} bs=1k seek=69632