Clik here to view.
BPI-M3 new image:berryboot-preview-bpi-m3.img 2016-08-24
A lot of images don't boot . For example: Retropie, Fedora, Openelec, Libreelec, Android 4.4, PuppyThis images boot only: BerryWebServer, Openmediavault, NOS-Ps, Screenly, Ubuntu core.I don't try the...
View ArticleRE : Banana pi BPI-M3 will send free sample for test
Hi I am a vetran, and retired disabled senior, who worked as an engineer and have been experimenting with Home Genie Automation on different platforms. The latest being the intel edison board. You can...
View ArticleBrand new M3 dead on arrival?
Just unboxed this, attached usb kbd, hdmi, eth and an sdcard from my older working raspi. Powered by external 2A PSU, and an micro USB cable also connected to my PC. Nothing happens, except Red led...
View ArticleBanana pi M3 need a new kernel which support SECCOMP for systemd-231
I use pacman -Syu to upgrade my system.A few days after, I realize I have failed units. #systemctl --state=failed UNIT LOAD ACTIVE SUB DESCRIPTION ● samba.service loaded failed failed Samba AD Daemon...
View ArticleBrand new M3 dead on arrival?
All right, that is not compatibe. Writing bananian to the card...
View ArticleBanana pi M3 need a new kernel which support SECCOMP for systemd-231
HI: you can rebuild kernel . and try again github.com BPI-SINOVOIP/BPI-M3-bsp/blob/master/linux-sunxi/arch/arm/configs/sun8iw6p1smp_bpi_defconfig#L477 # CONFIG_PHYS_ADDR_T_64BIT is not set...
View ArticleM3 only able to boot from eMMC while sd card is plugged in
Some months ago i bought a M3 to play with. I've taken the 2015-12-10-debian-8-jessie-mate-bpi-m3-sd-emmc.img and put in into the eMMC. Now i want to play with another distribution and put it on the...
View ArticleClik here to view.
Banana Pi images? + FEEDBACK
Oh crap I'm in the blank screen, red led camp too. Dammit.
View ArticleClik here to view.
Banana pi M3 need a new kernel which support SECCOMP for systemd-231
I rebuild kernel use this.Then i do 1. install BPI-M3-bsp/linux-sunxi/arch/arm/boot/uImage to mmcblk0p1 ( /mnt/bananapi/bpi-m3/linux/uImage ) 2. install BPI-M3-bsp/download/BPI_M3_720P/lib/modules to...
View ArticleM3 only able to boot from eMMC while sd card is plugged in
when M3 with a blank sdcard , it will boot from eMMC. If not a blank sdcard , it will boot failure.(permanent red LED)Empty your sdcard whith dd if=/dev/zero of=/dev/$sdcard bs=4M . you can use a TTL...
View ArticleFull 3d/2d support for all a31 with sgx544
I am new here, I might be missing something. What does the picture mean? Does it mean linux will be running smooth on the M2 if we install a driver. Will we be able to watch youtube smoothly on linux...
View Article2016-07-21-ubuntu-mate-16.04-desktop-armhf-raspberry-pi-bpi-m2-sd-emmc
same thing happened to me but after are reset it booted in 30sec. I recorded a session you can watch it here There is no sound and there is still some work left to do but the graphics are accelerated....
View ArticleM3 only able to boot from eMMC while sd card is plugged in
So there is no way doing this without wasting a sd card into the slot? What is the logic behind putting an empty thing in a slot, so that it boots. But if there is something on the sd-card it fails? I...
View ArticleClik here to view.
M3 only able to boot from eMMC while sd card is plugged in
This is really irritating . But we can solve this problem. I haven't tested these methods sudo dd if=boot0_sdcard.fex of=${card} bs=1k seek=8 sudo dd if=u-boot.fex of=${card} bs=1k seek=19096 sudo dd...
View ArticleBPI-M1+ is not initializing with any OS
Continuing the discussion from Banana PI plus BPI-M1+ dual core single-board computer: My M1+ board is not booting any OS (android , linux ,etc from banana-pi site) . I am using power adapter with 5...
View ArticleWifi repeater using Banana Pi M2+
I am interested in developing wifi repeater using BPI M2+ board.Can anybody post the output of "iw list" command ? This will show wi-fi specification of on-board module that is AP6212 . If there is...
View ArticleBLE beacon using on board AP6212
Is AP6212 on BananaPI M2+ support bluetooth BLE mode to convert it into Beacon ? My plan is to design iBeacon using Banana Pi M2+. So please copy & paste output for following command1) hciconfig...
View Article