Clik here to view.
Clik here to view.
[BPI-M64] New image: Android 6.0 (Vsersion:V2)
I have extract the init.rc in DragonFace. What shall I need to modify to receive root ? File "init.rc" import init.common.rc import init.sun50iw1p1.usb.rc import init.${ro.zygote}.rc on early-init...
View Article[BPI-M64] New image: Android 6.0 (Vsersion:V2)
#Justin Porting End # network #insmod /system/vendor/modules/usbnet.ko #insmod /system/vendor/modules/asix.ko #insmod /system/vendor/modules/qf9700.ko #insmod /system/vendor/modules/mcs7830.ko #insmod...
View ArticleBPI-M3 uinput module
maybe @sinovoip? You guys have working solution for the kernel module?
View ArticleCan't run any images
Hi baskwo It will always use the hollow plug DC-IN 5V/2,5Amp., not the OTGI have no M3. https://forum-bpi.de/portal
View ArticleCan't run any images
@Wolf2000 Alright, I bought a new 16GB Class 10 sd card. I'm going to give it a try. Do I have to use SDFormatter? Because I didn't. Also I'm using a AC/DC Adapter outputing 5V DC 2A throught micro...
View ArticleClik here to view.
Can't run any images
HiBecause SD Formatter has to be takenIn the first version was still the USB as power supply and also had many problems, once again not the OTG useSorry my english I come from Austria
View Article[BPI-M3] New image: Android 5.1 (Vsersion:V4) 2017-01-10
So, with which LCD screen is the "LCD-Version" supposed to work?
View ArticleClik here to view.
Can't run any images
So I need to use a "Power Supply" cable instead of micro usb + use the SDFormatter? Thanks for your help and don't worry I'm a French Canadian my english is the best
View ArticleCan't run any images
Is that one http://www.newegg.ca/Product/Product.aspx?Item=9SIA6ZE3MN8180&ignorebbr=1&cm_re=5v_1.7mm-_-9SIA6ZE3MN8180-_-ProductWould be good?
View Article[BPI-M3] New image: Android 5.1 (Vsersion:V4) 2017-01-10
we test this LCD screenhttps://bananapi.gitbooks.io/bpi-accessories/content/en/bpi70lcdtouchpanel.html
View ArticleBPI-M2 Ultra new...
are there any updates to this? it doesnt work on my unit, the older version does but with glitches.
View ArticleBanana Pi M64 Unboxing, First Boot and Initial Review
Hi Charles, thanks for your reply, I learnt quite much about so far. Based on my experiences the Armbian images seem not to solve the DVI problem. The issue is that DVI support is for Pine image 5.21...
View ArticleClik here to view.
Banana pi BPI-M2 Magic : IoT development board , allwinner R16 chip design...
banana pi BPI-M2 Magic : IoT development board , allwinner R16 chip design and Tina IoT linux support BPI-M2 Magic 1.JPG782x564 43.9 KB also can use Allwinner A33 chip . IMG_1144.JPG682x532 122 KB...
View ArticleBanana pi BPI-M2 Magic : IoT development board , allwinner R16 chip design...
banana pi BPI-M2 Magic test 40 PIN GPIO
View ArticleCan't run any images
I have the same problem tooLog bootload from consoleboot_log.txt (32,2 КБ)
View ArticleGigabit ethernet stucks
I have tried different images, including raspian jesse and Ubuntu 16.04 mate. 100 Mbit works fine, but gigabit stucks and pings start at 80% packet loss. The main reason I bought M64 it was the...
View ArticleBlinking screen with HDMI connection
if any of SINOVOIP answer to the problem of flickering screens. Sellers do not want to accept complaints on faulty equipment. Especially if their monitor Ultra 2 is not blinking. They say you have a...
View ArticleCan't run any images
Hello people, For boot problems with BPi M3 i noticed sth. about SD cards.Please make sure that your sd card is OK and healthly. When we start testing BPi M3 we also experienced some problems with...
View Article