Build armbian image for BPI-M2+
Also nice: I just wanted BPi M2+ as MacBook powered USB-Ethernet device. Took me 5 minutes with Armbian build system to throw in the necessary patch and let new kernel packages build:...
View ArticleClik here to view.
Testers needed to confirm/deny overheating problem
Hi, I ran the test for eight hours today on a v1.1 M2+ board with lima-tester 500M The board was powered via DC port, was not in a case and had no heatsink installed. This is the result: lima-tester...
View ArticleClik here to view.
Testers needed to confirm/deny overheating problem
Thank you. Downclocked to 240MHz and all CPU cores killed except of one. Really hot stuff
View ArticleBuild armbian image for BPI-M2+
As a beginner, I try to understand part of what you said.Armbian developers do a lot of great work.I compile slow for many reasons, such as virtual machines, download the dependent packages, etc., my...
View ArticleHow to use GPIO (control the LED on the board ) on M3 Android Images
OS: Android V3.0 HDMI reg-81x-cs-gpio0ldo/max_microvolts : Blue Led reg-81x-cs-gpio1ldo/max_microvolts : Green Led Step 1:Burn M3-Android images to Sdcard/Emmc Sep 2: Please input adb commnad adb...
View ArticleHow to use GPIO (control the LED on the board ) on M3 Android Images
so great and i will test it
View ArticleClik here to view.
Build armbian image for BPI-M2+
BPI_Q: I compile slow for many reasons, such as virtual machines, download the dependent packages, etc., my network environment is not very good. That's the reason our build system is caching almost...
View ArticleClik here to view.
Step by step guide to replace the Micro USB DC with a barrel connector
D.A: Doing a reverse-backport Android->Vanilla 3.4.39->Vanilla 3.4.112 - does not work on these sources. I think it's doable anyway. But using only my free time it will take a while before I...
View ArticleAndroid 5.1 v3 Bpi-m3
Hy, I run Android very smoothly on M3 but I can't set up really 1080p via hdmi. I've rooted m3 and set up google play store but, I can't use terminal to setting up bpi-bootsel. Can anyone help me?...
View ArticleStep by step guide to replace the Micro USB DC with a barrel connector
Hi, I had had a look at the github repo. Basically, they went down the same route of overlaying a vanilla 3.4.112 with the Allwinner Android patches as me - including mods for stuff unrelated to...
View ArticleBooting from SSD/SATA
BPI M3 is not a bad product but it's hard to develop it. BPI fans can refer its SOC spec by https://linux-sunxi.org/A83T, it features GPU by PowerVR which is not open source like Mali can be opened...
View ArticleClik here to view.
Step by step guide to replace the Micro USB DC with a barrel connector
D.A: Any chat or forum? http://linux-sunxi.org/sunxi:Community_portal The linux-sunxi community focuses more on mainline kernel while the H3 'sub community' tries to deal with what's currently...
View ArticleClik here to view.
Booting from SSD/SATA
noralee: It is tablet SOC without SATA function that makes sense that's why we add extra IC to support SATA for serving BPI fans. A83T has 1 USB host port and 1 USB HSIC port. The USB-to-SATA bridge...
View ArticleBooting from SSD/SATA
M3 onboard SATA and microUSB for DC-In on 2nd version due to BPI fans required. Of course, When they got samples that they found above feature and power change are not good and gave us feedback, we...
View ArticleHow to update the source of BPI-M3
Hi, I'm trying to update the source code of my BPI-M3 and give it a new boot logo. So i read that i most build the source from here: https://github.com/BPI-SINOVOIP/BPI-M3-bsp from a normal pc, but...
View ArticleRE : Banana pi BPI-M3 will send free sample for test
I am very interested in the BPI-M3, and could definitely do alot of work with one. I have a RPI 2 B+ but am mainly interested in the various OS options and getting them debugged and working properly...
View ArticleClik here to view.
BPI-G1 as a smart home gateway,all code open source
file name: G1_OpenSource english.rar readme: MasterController : STM32F103 sorce code, please uee IAR ARM 7.3 open project MasterControllerBLE: CC2540 source code,please use IAR 8051 8.10 open...
View ArticleHow to update the source of BPI-M3
Since you most likely never will get an answer from the people responsible for non existing documentation, start to look through this thread:...
View ArticleClik here to view.
Build armbian image for BPI-M2+
tkaiser: Now Bluetooth should work on BPi M2+ Could you tell me how to use BLE on BPI-M2+？My friend asked me, and I don't know how to use it scan BLE devices with armbian. Thanks!
View Article